Smart EV chargers with app control
Scheduling is where a smart charger pays for itself — everything else it does is a convenience.
Every figure here is taken from the manufacturer’s published listing and measured against the rest of the group. We do not test chargers. Where a listing is silent on a specification, this site prints not stated rather than a plausible default.
What this group looks like
| Measure | Middle half | Median |
|---|---|---|
| Output | 40 – 50 A | 48 A |
| Breaker required (derived) | 20 – 100 A | 60 A |
| Power | 9.6 – 12 kW | 11.5 kW |
| Cable reach | 25 – 25 ft | 25 ft |
The middle-half column spans the 25th to 75th percentile, so it describes where most of this group sits rather than being pulled about by one unusual unit.
This is arithmetic, not a design. The breaker figures here are the manufacturer’s published output multiplied by 1.25 and rounded up to the next standard size, which is what the continuous-load rule requires. They tell you what to expect before you call an electrician; they are not a substitute for one, and they say nothing about whether your panel has the capacity, what wire the run needs, or what your local code requires.
Against the market as a whole this group reaches about as far as average — a median cable of 25 ft against 25 ft overall. Cable length is the specification owners most often say they would change.
What these listings publish
Specification coverage is uneven, and knowing where it runs out is part of shopping honestly. A missing figure does not mean a worse charger — it means a less completely described one.
| Specification | Stated | Share |
|---|---|---|
| Output amperage | 36 | 100% |
| Voltage | 29 | 81% |
| Power in kW | 19 | 53% |
| Cable length | 24 | 67% |
| Connector type | 32 | 89% |
What they cost
Bands, not prices — and the charger is only part of the bill. A new circuit is frequently the larger half, and no listing prices it.
| Band | Listings | Share |
|---|---|---|
| Under $200 | 5 | 14% |
| $200–350 | 5 | 14% |
| $350–500 | 19 | 53% |
| $500–800 | 6 | 17% |
| Over $800 | 1 | 3% |
Off-peak scheduling is the whole financial case
Where a tariff has cheap overnight hours, charging inside them rather than on arrival is the difference the app makes, and on a large battery it is a meaningful sum over a year. Most cars can schedule charging themselves, so the charger’s app matters most when the car’s scheduling is poor, when the tariff changes shape, or when two cars share one charger.
What the rest of it is worth
Energy reporting is useful for a business claim or a shared household. Load balancing genuinely helps where the panel is tight. Firmware updates cut both ways: a charger that can be improved after purchase can also be changed after purchase, and it depends on a manufacturer’s servers staying up.
A dumb charger on a timer is not a bad answer
If the car schedules charging well and the tariff is flat, the app adds convenience rather than value. This page exists to help you compare the ones that have it, not to argue that you need it.
What the app is genuinely for
Scheduling is the feature that pays for itself, and only where a tariff has cheap overnight hours. Everything else the app does — energy reporting, firmware updates, remote start — is convenience. Most cars will schedule their own charging, so the charger’s app matters most when the car’s scheduling is poor, when two cars share one charger, or when a business claim needs the energy figures separated from the household’s.
Connectivity is a dependency, not a feature
A charger that needs an app needs the manufacturer’s servers, the home network and a maintained application. Any of the three can fail or be withdrawn, and a charger whose scheduling lives entirely in the cloud stops scheduling when they do. The specification worth checking is what the unit does with no connection: the good answer is that it charges on its last schedule, and the poor one is that it charges immediately or not at all.
The breaker is not the charger’s amperage
An EVSE is a continuous load, so the circuit must be rated at least 125 per cent of the charger’s output. Across this corpus the median charger draws 40 A and needs a 50 A circuit, and the relationship holds at every step of the range. Buyers who size the circuit from the headline figure discover the difference when the electrician quotes, and there is no breaker made at some of the amperages people expect to buy.
What happens at the end of support
A charger is a fifteen-year fixture and an app is not. Manufacturers withdraw applications, change accounts and occasionally leave the market, and a unit whose scheduling depends entirely on a service has a functional life bounded by that service rather than by its hardware. Units that expose a local interface, or that hold their schedule on the device, are insulated from that. It is rarely stated and it is the specification most likely to matter in year eight.
Before you buy
Ask what the panel can spare before choosing an output
A charger’s amperage decides the circuit, and the circuit decides whether the job is an afternoon or a service upgrade. In an older house the panel is frequently the real constraint, and finding that out before choosing a charger saves returning one.
Measure the cable run properly
Measure from where the charger will actually be mounted to the furthest charge-port position you expect to use — the car parked the other way round, and a second vehicle. Twenty-five feet is common and is not generous once the cable goes around a car rather than straight at it.
Treat marketing language as a claim, not a specification
Where a phrase on a listing matters to your decision, look for the number behind it: a stated output in amps rather than a sentence about fast charging, a stated cable length rather than a description of reach. Where this site could not find that number, it says not stated.
Compare them
The finder below is already filtered to this group. Widen or narrow it from there — every result shows the breaker it needs and is measured against the median for its own output class.
71 chargers match

EVDANCE Level 2 EV Charger for Tesla, 40A / 9.6kW Fast Home EV Charging Station with NEMA 14-50 Plug, 25FT Cable, Adjustable Current & Delay Timer, Compatible with All Tesla Model 3/Y/S/X (NACS Plug)
- Breaker needed
- 50A
- Power
- 9.6kW
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- not stated
- Weight
- 12lb
Charger output
40A
Plug-in · 33 to 40 A charger · 18 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 40.

Lectron Level 1 EV Charger – ETL Certified, 110V, 15 Amp, 16 ft Extension Cord & J1772 Cable – Portable Electric Car Charger for J1772 EVs with NEMA 5-15 Plug
- Breaker needed
- 20A
- Power
- 1.6kW
- Voltage
- 120V
- Cable
- 16ft
- W x D x H
- 4×15×11in
- Weight
- 6lb
Charger output
15A
Portable · up to 16 A charger · 16 chargers
Cable reach
16ft of cable
-36% vs the 25 median — shorter than most in its class
Output is -6% against the class median of 16.

Autel 50A Level 2 EV Charger, 240V Hardwired J1772, WiFi Bluetooth, 25ft
- Breaker needed
- 70A
- Power
- 12.0kW
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- 9×19×10in
- Weight
- 21lb
Charger output
50A
Hardwired · 49 A and above · 11 chargers
Cable reach
25ft of cable
No class baseline to compare against.
Output is 0% against the class median of 50.

Autel Home Level 2 EV Charger up to 50Amp, 240V, Indoor/Outdoor Car Charging Station, Flexible 25-Foot Cable,Hardwired, Silver
- Breaker needed
- 70A
- Power
- 12.0kW
- Voltage
- 240V
- Cable
- not stated
- W x D x H
- 9×19×15in
- Weight
- 17lb
Charger output
50A
Hardwired · 49 A and above · 11 chargers
Cable reach
Cable length not stated, so reach cannot be compared.
Output is 0% against the class median of 50.

Autel Home Smart Electric Vehicle (EV) Charger up to 50Amp, 240V, Indoor/Outdoor Car Charging Station with Level 2, Wi-Fi and Bluetooth Enabled EVSE, Hardwired,25-Foot Cable,Sierra Blue
- Breaker needed
- 70A
- Power
- 12.0kW
- Voltage
- 240V
- Cable
- not stated
- W x D x H
- 12×16×9in
- Weight
- 18lb
Charger output
50A
Hardwired · 49 A and above · 11 chargers
Cable reach
Cable length not stated, so reach cannot be compared.
Output is 0% against the class median of 50.

EMPORIA Level 2 EV Charger w/NACS, Compatible with Tesla – 48 amp Electric Car Charger, Preconfigured for Hardwired Install with Whip, UL/Energy Star WiFi-Enabled EVSE, 24ft Cable, White
- Breaker needed
- 60A
- Power
- 11.5kW
- Voltage
- 240V
- Cable
- 24ft
- W x D x H
- not stated
- Weight
- not stated
Charger output
48A
Hardwired · 41 to 48 A charger · 17 chargers
Cable reach
24ft of cable
-4% vs the 25 median — typical for its class
Output is 0% against the class median of 48.

WOLFBOX Level 2 EV Charger 48amp,Hardwired with J1772 Connector,240V(E48)
- Breaker needed
- 60A
- Power
- not stated
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- not stated
- Weight
- 13lb
Charger output
48A
Hardwired · 41 to 48 A charger · 17 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 48.

EVIQO Level 2 EV Charger J1772 48A – Hardwired 240V Wall Charging Station
- Breaker needed
- 60A
- Power
- not stated
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- 9×4×9in
- Weight
- 20lb
Charger output
48A
Hardwired · 41 to 48 A charger · 17 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 48.

Level 2 EV Charger, 48Amp/11.5KW/240V, UL 2594, ETL & Energy Star
- Breaker needed
- 60A
- Power
- 11.5kW
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- 9×10×4in
- Weight
- 13lb
Charger output
48A
All · 41 to 48 A charger · 17 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 48.

EVIQO Level 2 EV Charger J1772 40A NEMA 14-50 – 240V Wall Charging Station
- Breaker needed
- 50A
- Power
- not stated
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- 6×5×2in
- Weight
- 21lb
Charger output
40A
Plug-in · 33 to 40 A charger · 18 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 40.

ELEGRP Level 2 EV Charger 40Amp, J1772 Portable Electric Car Charger, 240V NEMA 14-50 Plug, ETL Certified with 25FT Extension Cable
- Breaker needed
- 50A
- Power
- 9.6kW
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- 134×144×47in
- Weight
- 13lb
Charger output
40A
Portable · 33 to 40 A charger · 18 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 40.

EVDANCE Level 2 EV Charger 40Amp, 240V 9.6KW Portable Electric Vehicle Charging Stations with NEMA 14-50P, 25FT Cable Adjustable Current/Timing Delay Home Electric Car Charger for J1772 BEVs/PHEVs
- Breaker needed
- 50A
- Power
- 9.6kW
- Voltage
- 240V
- Cable
- 25ft
- W x D x H
- not stated
- Weight
- 12lb
Charger output
40A
Portable · 33 to 40 A charger · 18 chargers
Cable reach
25ft of cable
0% vs the 25 median — typical for its class
Output is 0% against the class median of 40.
Related
- The full EV charger finder — unfiltered, every install method.
- What size breaker does an EV charger need? — the full table.
- How we compile these figures.
